Digisol DG-GS4826S, Management Manual

Page: 659 / 1344

C
HAPTER
25 | System Management Commands
File Management
– 659 –
R
ELATED
C
OMMANDS
dir (663)
whichboot (664)
copy
This command moves (upload/download) a code image or configuration file
between the switch’s flash memory and an FTP/TFTP server. When you
save the system code or configuration settings to a file on an FTP/TFTP
server, that file can later be downloaded to the switch to restore system
operation. The success of the file transfer depends on the accessibility of
the FTP/TFTP server and the quality of the network connection.
S
YNTAX
copy file { file | ftp | running-config | startup-config | tftp | unit }
copy running-config { file | ftp | startup-config | tftp }
copy startup-config { file | ftp | running-config | tftp }
copy tftp { file | https-certificate | public-key | running-config
| startup-config }
copy unit file
file
- Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS
secure site certificate.
public-key - Keyword that allows you to copy a SSH key from a
TFTP server. ( See "Secure Shell" on page 753. )
running-config - Keyword that allows you to copy to/from the
current running configuration.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
unit - Keyword that allows you to copy to/from a specific unit in the
stack.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
u
The system prompts for data required to complete the copy command.
u
The destination file name should not contain slashes (\ or /), and the
maximum length for file names is 31 characters for files on the switch.
(Valid characters: A-Z, a-z, 0-9, “.”, “-”)
u
The switch supports only two operation code files, but the maximum
number of user-defined configuration files is 16.