Digisol DG-GS4826S, Management Manual

Page: 1034 / 1344

C
HAPTER
42 | Multicast Filtering Commands
Multicast VLAN Registration
– 1034 –
E
XAMPLE
The following statically assigns a multicast group to a receiver port:
Console(config)#interface ethernet 1/7
Console(config-if)#mvr type receiver
Console(config-if)#mvr vlan 3 group 225.0.0.5
Console(config-if)#
show mvr
This command shows information about the global MVR configuration
settings when entered without any keywords, the interfaces attached to
the MVR VLAN using the interface keyword, or the multicast groups
assigned to the MVR VLAN using the members keyword.
S
YNTAX
show mvr [ interface [ interface ] | members [ ip-address ]]
interface
ethernet unit / port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26/50)
port-channel channel-id (Range: 1-32)
ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
D
EFAULT
S
ETTING
Displays global configuration settings for MVR when no keywords are used.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Enter this command without any keywords to display the global settings for
MVR. Use the interface keyword to display information about interfaces
attached to the MVR VLAN. Or use the members keyword to display
information about multicast groups assigned to the MVR VLAN.
E
XAMPLE
The following shows the global MVR settings:
Console#show mvr
MVR Config Status : Enabled
MVR Running Status : Active
MVR Multicast VLAN : 1
MVR Current Groups : 10
MVR Max. Supported Groups : 255
MVR Upstream Source IP : 192.168.0.3
Console#