Digisol DG-GS4826S, Management Manual

Page: 143 / 1344

C
HAPTER
5 | Interface Configuration
Port Configuration
– 143 –
Figure 25: Configuring Connections by Port Range
D
ISPLAYING
C
ONNECTION
S
TATUS
Use the Interface > Port > General (Show Information) page to display the
current connection status, including link state, speed/duplex mode, flow
control, and auto-negotiation.
CLI R
EFERENCES
u
"show interfaces status" on page 856
P
ARAMETERS
These parameters are displayed in the web interface:
u
Port – Port identifier.
u
Type – Indicates the port type. (1000Base-T, 1000Base SFP, or 10G)
u
Name – Interface label.
u
Admin – Shows if the port is enabled or disabled.
u
Oper Status – Indicates if the link is Up or Down.
u
Media Type – Media type used.
(Options: 1000Base-T RJ-45 – Copper-Forced;
SFP – Copper-Forced, SFP-Forced, or SFP-Preferred-Auto;
XFP and 10GBase-T – SFP-Preferred-Auto;
Default: 1000Base-T RJ-45 – Copper-Forced,
SFP – SFP-Preferred-Auto,
XFP and 10GBase-T – SFP-Preferred-Auto)
u
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
u
Oper Speed Duplex – Shows the current speed and duplex mode.
u
Oper Flow Control – Shows if flow control is enabled or disabled.