Digisol DG-GS4826S, Management Manual

Page: 653 / 1344

C
HAPTER
25 | System Management Commands
System Status
– 653 –
E
XAMPLE
Refer to the example for the running configuration file.
R
ELATED
C
OMMANDS
show running-config (650)
show system
This command displays system information.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
C
OMMAND
U
SAGE
u
For a description of the items shown by this command, refer to
"Displaying System Information" on page 113 .
u
There are three fans in both models. Fan 1 and 2 are inside the unit and
provide cooling for the power supply. Fan 3 is located on the right side
of the unit, and forces air out.
u
There are two thermal detectors in both models The first detector is
near the air flow intake vents on both models. The second detector is
near the switch ASIC on the DG-GS4826S and near the physical layer
ASIC on the DG-GS4850S.
u
No information will be displayed under POST Result, unless there is a
problem with the unit. If any POST test indicates “FAIL,” contact your
distributor for assistance.
E
XAMPLE
Console#show system
System Description : DG-GS4850S/DG-GS4826S
System OID String : 1.3.6.1.4.1.36293.1.1.2.3
System Information
System Up Time : 0 days, 0 hours, 8 minutes, and 40.72 seconds
System Name : test
System Location :
System Contact :
MAC Address (Unit 1) : 00-17-7C-0C-8F-EE
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
System Fan:
Force Fan Speed Full : Disabled
Unit 1
Fan 1: Ok Fan 2: Ok Fan 3: Ok
System Temperature:
Unit 1