Digisol DG-FS4528P, Management Manual

Page: 432 / 973

C
HAPTER
20 | Using the Command Line Interface
CLI Command Groups
– 432 –
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
602
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number, TCP control code, ARP
request/response packets), IPv6 frames (based on
address or DSCP traffic class), or non-IP frames (based
on MAC address or Ethernet type)
649
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
671
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
690
Power over Ethernet Configures power output for connected devices 701
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port or VLAN
708
Rate Limit Controls the maximum rate for traffic transmitted or
received on a port
711
Automatic Traffic Control Configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured
rate limits or to shut down a port
713
Generic Loopback
Detection
Configures detection of loopback conditions caused by
hardware problems or faulty protocol settings
727
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
732
Spanning Tree Configures Spanning Tree settings for the switch 736
Ethernet Automatic
Protection Switching
Configures EAPS for increased availability of Ethernet
rings commonly used in service provider networks
765
Ethernet Ring
Protection Switching
Configures G.8032 ERPS for increased availability of
Ethernet rings commonly used in service provider
networks
779
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, IP-subnet VLANs, MAC-based
VLANs, voice VLANs, and QinQ tunneling
792
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for each
priority queue, also sets priority for DSCP
840
Quality of Service Configures Differentiated Services classification criteria
and service policies
848
Multicast Filtering Configures IGMP multicast filtering, query, profile;
specifies ports attached to a multicast router; also
configures multicast VLAN registration
859
MLD Snooping Configures Multicast Listener Discovery for IPv6 traffic 891
Link Layer Discovery
Protocol Configures LLDP settings to enable information discovery
about neighbor devices
898
Domain Name Service Configures DNS services. 921
Table 34: Command Group Index (Continued)
Command Group Description Page