Digisol DG-FS4528P, Management Manual

Page: 159 / 973

C
HAPTER
7 | Security Measures
Configuring Local/Remote Logon Authentication
– 159 –
RADIUS – User authentication is performed using a RADIUS server
only.
TACACS – User authentication is performed using a
server only.
[authentication sequence] – User authentication is performed by up
to three authentication methods in the indicated sequence.
RADIUS Settings
Global – Provides globally applicable RADIUS settings.
Server Index – Specifies one of five RADIUS servers that may be
configured. The switch attempts authentication using the listed
sequence of servers. The process ends when a server either
approves or denies access to a user.
Server IP Address – Address of authentication server.
(A Server Index entry must be selected to display this item.)
Authentication Port Number – Network (UDP) port on
authentication server used for authentication messages.
(Range: 1-65535; Default: 1812)
Accounting Port Number – Network (UDP) port on authentication
server used for accounting messages.
(Range: 1-65535; Default: 1813)
Number of Server Transmits – Number of times the switch tries
to authenticate logon access via the authentication server.
(Range: 1-30; Default: 2)
Timeout for a Reply – The number of seconds the switch waits for
a reply from the RADIUS server before it resends the request.
(Range: 1-65535; Default: 5)
TACACS Settings
Global – Provides globally applicable settings.
Server Index – Specifies the index number of the server to be
configured. The switch currently supports only one server.
Server IP Address – Address of the server.
(A Server Index entry must be selected to display this item.)
Server Port Number – Network (TCP) port of server
used for authentication messages. (Range: 1-65535; Default: 49)
Number of Server Transmits – Number of times the switch tries
to authenticate logon access via the authentication server.
(Range: 1-30; Default: 2)