Digisol DG-FS4528P, Management Manual

Page: 428 / 973

C
HAPTER
20 | Using the Command Line Interface
Entering Commands
– 428 –
session with the user name and password “admin.” The system will now
display the “Console#” command prompt. You can also enter Privileged
Exec mode from within Normal Exec mode, by entering the enable
command, followed by the privileged level password “super.”
To enter Privileged Exec mode, enter the following user names and
passwords:
Username: admin
Password: [admin login password]
CLI session with the DG-FS4528P is opened.
To end the CLI session, enter [Exit].
Console#
Username: guest
Password: [guest login password]
CLI session with the DG-FS4528P is opened.
To end the CLI session, enter [Exit].
Console>enable
Password: [privileged level password]
Console#
C
ONFIGURATION
C
OMMANDS
Configuration commands are privileged level commands used to modify
switch settings. These commands modify the running configuration only
and are not saved when the switch is rebooted. To store the running
configuration in non-volatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
Access Control List Configuration - These commands are used for
packet filtering.
Class Map Configuration - Creates a DiffServ class map for a specified
traffic type.
EAPS Configuration - These commands configure Automatic Ethernet
Protection Switching for increased availability of Ethernet rings
commonly used in service provider networks.
ERPS Configuration – These commands configure G.8032 Ethernet Ring
Protection Switching for increased availability of Ethernet rings
commonly used in service provider networks.
Global Configuration - These commands modify the system level
configuration, and include commands such as hostname and snmp-
server community .