Digisol DG-FS4528P, Management Manual

Page: 559 / 973

C
HAPTER
25 | Authentication Commands
AAA
– 559 –
aaa accounting
update
This command enables the sending of periodic updates to the accounting
server. Use the no form to disable accounting updates.
S
YNTAX
aaa accounting update [ periodic interval ]
no aaa accounting update
interval - Sends an interim accounting record to the server at this
interval. (Range: 1-2147483647 minutes)
D
EFAULT
S
ETTING
1 minute
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
When accounting updates are enabled, the switch issues periodic
interim accounting records for all users on the system.
Using the command without specifying an interim interval enables
updates, but does not change the current interval setting.
E
XAMPLE
Console(config)#aaa accounting update periodic 30
Console(config)#
aaa authorization
exec
This command enables the authorization for Exec access. Use the no form
to disable the authorization service.
S
YNTAX
aaa authorization exec { default | method-name }
group { | server-group }
no aaa authorization exec { default | method-name }
default - Specifies the default authorization method for Exec
access.
method-name - Specifies an authorization method for Exec access.
(Range: 1-255 characters)
group - Specifies the server group to use.
- Specifies all hosts configured with the
tacacs-server command.
server-group - Specifies the name of a server group configured
with the aaa group server command. (Range: 1-255 characters)