Digisol DG-FS4528P, Management Manual

Page: 412 / 973

C
HAPTER
18 | Multicast Filtering
Multicast VLAN Registration
– 412 –
MVR Receiver Group IP Address – Specifies groups to be managed
through the receiver VLAN.
W
EB
I
NTERFACE
To configure the MVR Receiver VLAN and assigned addresses:
1. Click MVR, Receiver Configuration.
2. Select a VLAN from the MVR Receiver VLAN list.
3. Enter the required multicast groups in the member list, and then click
the Add or Remove button to modify the list.
Figure 214: Configuring MVR Receiver VLAN and Group Addresses
D
ISPLAYING
MVR
R
ECEIVER
G
ROUPS
Use the MVR > Receiver Group IP Information page to display the
interfaces assigned to the MVR receiver groups.
CLI R
EFERENCES
"show mvr" on page 887
P
ARAMETERS
These parameters are displayed:
Group IP Address – Multicast groups assigned to the MVR VLAN.
Group Port List – Shows the interfaces with subscribers for multicast
services provided through the MVR Receiver VLAN.
W
EB
I
NTERFACE
To display the interfaces assigned to the MVR receiver groups:
1.
Click Multicast, Receiver Group IP Information.
2. Select a receiver group multicast address from the Group IP Address
list to show the interfaces which have joined the selected group.