Digisol DG-FS4528P, Management Manual

Page: 260 / 973

C
HAPTER
8 | Interface Configuration
Trunk Configuration
– 260 –
W
EB
I
NTERFACE
To display LACP port counters:
1. Click Port, LACP, Port Counters Information.
2. Select a group member from the Port list.
Figure 117: Displaying LACP Port Counters
D
ISPLAYING
LACP
S
ETTINGS AND
S
TATUS
FOR THE
L
OCAL
S
IDE
Use the Port > LACP > Port Internal Information page to display the
configuration settings and operational state for the local side of a link
aggregation.
CLI R
EFERENCES
"show lacp" on page 697
P
ARAMETERS
These parameters are displayed:
Marker Unknown Pkts Number of frames received that either (1) Carry the Slow
Protocols Ethernet Type value, but contain an unknown PDU, or
(2) are addressed to the Slow Protocols group MAC Address, but
do not carry the Slow Protocols Ethernet Type.
Marker Illegal Pkts Number of frames that carry the Slow Protocols Ethernet Type
value, but contain a badly formed PDU or an illegal value of
Protocol Subtype.
Table 18: LACP Port Counters (Continued)
Parameter Description
Table 19: LACP Internal Configuration Information
Parameter Description
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority LACP port priority assigned to this interface within the channel group.
Admin Key Current administrative value of the key for the aggregation port.
Oper Key Current operational value of the key for the aggregation port.