Digisol DG-FS4528P, Management Manual

Page: 471 / 973

C
HAPTER
22 | System Management Commands
Line
– 471 –
line
This command identifies a specific line for configuration, and to process
subsequent line configuration commands.
S
YNTAX
line { console | vty }
console - Console terminal line.
vty - Virtual terminal for remote console access (i.e., Telnet).
D
EFAULT
S
ETTING
There is no default line.
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Telnet is considered a virtual terminal connection and will be shown as
“VTY” in screen displays such as show users . However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
E
XAMPLE
To enter console line mode, enter the following command:
Console(config)#line console
Console(config-line)#
R
ELATED
C
OMMANDS
show line (479)
show users (457)
disconnect Terminates a line connection PE
show line Displays a terminal line's parameters NE, PE
* These commands only apply to the serial port.
Table 43: Line Commands (Continued)
Command Function Mode