Digisol DG-FS4528P, Management Manual

Page: 429 / 973

C
HAPTER
20 | Using the Command Line Interface
Entering Commands
– 429 –
IGMP Profile - Sets a profile group and enters IGMP filter profile
configuration mode.
Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation .
Line Configuration - These commands modify the console port and
Telnet configuration, and include command such as parity and
databits .
Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
Policy Map Configuration - Creates a DiffServ policy map for multiple
interfaces.
Server Group Configuration - Adds AAA security servers to defined lists.
Time Range - Sets a time range for use by other functions, such as
Access Control Lists.
VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.
Table 32: Configuration Command Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line) 471
Access
Control List
access-list arp
access-list ip standard
access-list ip extended
access-list ipv6 standard
access-list ipv6 extended
access-list mac Console(config-arp-acl)
Console(config-std-acl)
Console(config-ext-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
Console(config-mac-acl) 667
650
650
657
657
662
Class Map class-map Console(config-cmap) 849
EAPS eaps domain Console(config-eaps) 771
ERPS erps domain Console(config-erps) 779
Interface interface {ethernet port |
port-channel id | vlan id }
Console(config-if) 672
MSTP spanning-tree mst-configuration Console(config-mstp) 743