Digisol DG-FS4528P, Management Manual

Page: 821 / 973

C
HAPTER
39 | VLAN Commands
Configuring Private VLANs
– 821 –
To configure private VLANs, follow these steps:
1. Use the private-vlan command to designate one or more community
VLANs and the primary VLAN that will channel traffic outside of the
community groups.
2.
Use the private vlan association command to map the community
VLAN(s) to the primary VLAN.
3. Use the switchport mode private-vlan command to configure ports as
promiscuous (i.e., having access to all ports in the primary VLAN) or
host (i.e., community port).
4.
Use the switchport private-vlan host-association command to assign a
port to a community VLAN.
5. Use the switchport private-vlan mapping command to assign a port to a
primary VLAN.
6.
Use the show vlan private-vlan command to verify your configuration
settings.
private-vlan
Use this command to create a primary or community private VLAN. Use the
no form to remove the specified private VLAN.
S
YNTAX
private-vlan vlan-id { community | primary }
no private-vlan vlan-id
vlan-id - ID of private VLAN. (Range: 2-4094, no leading zeroes).
community - A VLAN in which traffic is restricted to host
members in the same VLAN and to promiscuous ports in the
associate primary VLAN.
primary - A VLAN which can contain one or more community
VLANs, and serves to channel traffic between community VLANs
and other locations.
D
EFAULT
S
ETTING
None
switchport private-vlan
mapping
Maps an interface to a primary VLAN IC
Display Private VLAN Information
show vlan private-vlan Shows private VLAN information NE, PE
Table 124: Private VLAN Commands
Command Function Mode