Digisol DG-FS4528P, Management Manual

Page: 163 / 973

C
HAPTER
7 | Security Measures
AAA Authorization and Accounting
– 163 –
Authorization of users that access management interfaces on the
switch through the console and Telnet.
To configure AAA on the switch, you need to follow this general process:
1.
Configure RADIUS and server access parameters. See
“
Configuring Local/Remote Logon Authentication .”
2. Define RADIUS and server groups to support the accounting
and authorization of services.
3.
Define a method name for each service to which you want to apply
accounting or authorization and specify the RADIUS or server
groups to use.
4. Apply the method names to port or line interfaces.
N
OTE
:
This guide assumes that RADIUS and servers have already
been configured to support AAA. The configuration of RADIUS and
server software is beyond the scope of this guide, refer to the
documentation provided with the RADIUS or server software.
C
ONFIGURING
AAA
RADIUS G
ROUP
S
ETTINGS
Use the AAA > RADIUS Group Settings screen to define the configured
RADIUS servers to use for accounting and authorization.
CLI R
EFERENCES
"AAA" on page 555
P
ARAMETERS
These parameters are displayed:
Group Name - Defines a name for the RADIUS server group. (1-255
characters)
Server Index - Specifies the RADIUS server and sequence to use for
the group. (Range: 1-5)
When specifying the index for a RADIUS sever, the server index must
already be defined (see "Configuring Local/Remote Logon
Authentication" ).
W
EB
I
NTERFACE
To configure the RADIUS server groups to use for accounting and
authorization:
1. Click Security, AAA, RADIUS Group Settings.
2.
Enter the group name, and select the index of the server to use for
each priority level.