OPERATOR’S MANUAL
42 /
ACCESSORIES
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
HIGH/LOW ALARM BEHAVIOR
Select how often high/low alarms should display:
No Alarms:
Accessory alarms cannot display.
Repeatedly:
Accessory alarms can display continuously.
Pressing
CANCEL
when the alarm comes up will temporarily
disable the alarm until the alarm state is re-entered.
Once Per Power Cycle:
Accessory alarms can display only
once per power cycle.
Once Per Safety Input:
Accessory alarms can display only
once per Safety Input cycle.
Once Per Imp Lift:
Accessory alarms can display only once
per implement lift cycle.
A combination of the gating and behavior alarms determine
where and how often an alarm will appear. For example, if
Gating is set to “None” and Behavior is set to “Repeatedly”, the
alarm will trigger regardless of what screen the user is in and will
continuously happen when the alarm state is re-entered.
PRESSURE SENSOR SETUP
Figure 31
Pressure Sensor Setup Page 1
SENSOR NAME
Pressing the Sensor Name field at the top right can change the
desired name for the sensor.
PRESSURE UNITS
Select between millibar, bar, or KPA for the pressure unit.
