OPERATOR’S MANUAL
10 / CONTROLS
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
CONTROLS
NOTE
It is recommended that materials are created before
configuring control channels.
Up to eight control channels are available to control material
application based on the purchased feature set and installed
harness type.
ASSIGN A CONTROL CHANNEL
The Controls screen on initial setup is blank. Adding, deleting,
and editing channel setup parameters are defined at this screen.
As channels are configured and saved in sequential order, the
Controls screen identifies the channel type and material
assigned. A channel type cannot be changed after setup. The
channel must be removed and a new one created.
Once a channel is created, select the channel to edit setup
parameters.
TO CREATE A CONTROL CHANNEL:
1. Press the
CONTROLS
button.
2. Press the
ADD
button to select the control channel type.
3. Select the desired channel type button.
-
The selected channel type now appears on the
Control screen.
4. Press to highlight and select the channel.
5. Press the
EDIT
button to open the channel and set
channel parameters.
The selected channel type now appears on the Controls screen.
