OPERATOR’S MANUAL
ISO
6
Version 4 Quick Start Guide
CONTROLS / 13
6011662 Rev B
CAUTION
Hoppers are assumed to be empty for this calibration. If
loaded, material may dispense onto the ground.
PERFORM A VALVE CALIBRATION (FIGURE 9)
1. At the Controls screen, press the
VALVE CAL
button to
access the Valve Calibration screen.
2.
Move the implement to the “raised” position.
3. Apply the tractor brakes and lock in the applied position.
4.
Put the transmission in “park” or in a locked position.
-
Verify disc speed high limit is set correctly. Valve
calibration will try and obtain the high disc speed.
DANGER
When the START key is engaged, the machine will become
operational. All necessary precautions must be taken to
ensure user safety. Failure to practice all necessary caution
may result in serious injury or death.
5. Start the tractor and engage the hydraulic system,
i.e. PTO or auxiliary lever.
6. Run the engine at normal operating speed until the
hydraulic fluid is at normal operating temperature.
7. Press the
START
button.
8. The valve calibration immediately starts.
9. Keep the hydraulics engaged until the calibration is
complete. The calibration may take a few minutes to
complete. Each calibration step is monitored on the lower
left corner of the display.
10. When the calibration is complete, the control shuts down
automatically. All calibration data is automatically stored.
CAUTION
DANGER
