OPERATOR’S MANUAL
50 / USER LEVELS
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
USER LEVELS
LOCK TO USER LEVEL 1 (OPERATOR)
When setup parameters are complete, locking down to Operator
User Level 1 prevents parameters from being changed. All Setup
screens are viewable in Level 1 mode with non-selectable
constants in a gray tone.
TO SET USER LEVEL 1 MODE:
1. Press the
VERSION
key.
2. At the Version screen, press the
PASSWORD
key.
3. At the Password screen, press the
LEV 1 LOCK
key.
4. Press the Yes (checkmark) key.
-
The “OEM or Dealer Screens On” located at screen
bottom disappears after the
LEV 1 LOCK
button is
pressed as an indicator it is now in User Level 1 mode.
Figure 37
Lock to User Level 1 (Operator)
USER LEVEL 2 (DEALER)
TO UNLOCK A CONTROLLER INTO USER
LEVEL 2 (DEALER):
1. Press the
VERSION
button.
2. Next tap the
PASSWORD
softkey.
3. Enter 2 + the 5 digit serial number found on the controller.
4. Press
OK
.
