OPERATOR’S MANUAL
12 / CONTROLS
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
Figure 8
Enter Channel Parameters
VALVE CALIBRATION
Performing a valve calibration is required for most channel
types to set system parameters and should be performed for
best results.
A
VALVE CAL
button appears on the control channel screen if
this step is appropriate for the assigned channel type.
TIP: Valve calibration steps 1-10 are the same when performing
for Planter, Granular, Liquid Flow, Fan and Shaft Control.
At the Liquid channel, a manual K-Factor calibration can also
be performed.
