OPERATOR’S MANUAL
36 / SENSORS
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
Figure 27
Assigning Sensors to ISO
6
Module
11. Repeat steps 4-10 until all sensors on all modules
are assigned.
12. After all sensors are entered, press the Arrow button.
-
A sensor’s position is indicated in the channel/row
it is assigned to with an “X” indicating the sensor
is off (Figure 26).
-
A malfunctioning sensor can be set to OFF to eliminate
row failure alarms. Sensors turned off are not calculated
in the population average and planter width is not
affected. A physically disconnected sensor will trigger
a configured but not detected alarm.