OPERATOR’S MANUAL
8 / HARNESS SELECT
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
HARNESS SELECT
IDENTIFY HARNESS STYLE
IMPORTANT
A harness style must be selected prior to channel setup.
The system default is set to “Monitor Only” with no control
channels enabled.
IMPORTANT
Harness selection changes the system configuration and
should only be done when changing physical harnesses.
It is recommended to perform a complete system setup after
changing the harness type.
SELECTING A HARNESS:
1. Press the
SYSTEM
button.
2. Press the Harness drop down box and select the
appropriate harness.
3. Press the
SAVE
button.
-
Press the Cancel ‘
X
’ button to cancel the
selected changes.
4. A power cycle is required to reboot the system.
Figure 5
Select the Harness Type
