DA 40 NG AFM
Handling
Doc. # 6.01.15-E
Rev. 3
01-Jul-2014
Page 8 - 7
The control surfaces gust lock is installed as follows:
1.
Move the rudder pedals fully rearward.
2.
Engage the control surfaces gust lock with the pedals.
3.
Engage the stick, wrap straps around stick once.
4.
Attach the locks and tighten the straps.
For removal, reverse the sequence.
NOTE
It is recommended to cover the canopy when the airplane is
parked outdoors, in direct sunlight, at outside air temperatures
above +25 °C (77 °F), in order to prevent excessive heat
generation within the instrument panel which can cause
damage to the equipment. Such a canopy cover is available
from Diamond Aircraft Industries, P/N: S_30172.
Summary of Contents for DA 40 NG
