Normal Operating
Procedures
DA 40 NG AFM
Page 4A - 28
Rev. 3
01-Jul-2014
Doc. # 6.01.15-E
4A.5.9 CRUISE
1.
Flaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UP
2.
POWER lever . . . . . . . . . . . . . . . . . . . . . . . . up to 92% or maximum 2100 RPM
3.
Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . as required
4.
Fuel transfer . . . . . . . . . . . . . . . . . . . . . . . . . repeat as required (in accordance
with 4A.5.10 - FUEL TRANSFER)
NOTE
The engine manufacturer recommends a cruise power setting
of 75 %.
NOTE
Proper operation of the transfer pump must be checked by
monitoring the fuel quantities (increasing in the MAIN tank,
decreasing in the AUX tank, approx. 1 US gal per minute).
END OF CHECKLIST
Summary of Contents for DA 40 NG
