EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE
23. Install the oil pan. Refer to section 19.7.
PERSONAL INJURY
To avoid injury when removing or installing a heavy engine
component, ensure the component is properly supported
and securely attached to an adequate lifting device to
prevent the component from falling.
24. Use a Cylinder Head/Engine Lifting Bar tool (W470589006200) with hooks attached to the
lifting brackets at each end of the engine and remove the engine from the overhaul stand.
25. Remove the overhaul stand adaptor plate from the engine block.
26. Install any accessories that were removed.
27. Install the engine to the equipment from which it was removed.
28. Fill the cooling system. Refer to OEM speci
fi
cations.
29. Prime engine lubrication system. Refer to section 27.1.
30. After replacing the main or connecting rod bearings or installing a new crankshaft, operate
the engine as outlined in the "Run-In Schedule." See
DDC-SCV-MAN-0075
.
All information subject to change without notice.
DDC-SVC-MAN-0081 2010
Copyright © 2010 DETROIT DIESEL CORPORATION
17-13
Summary of Contents for EPA07
Page 1: ......
Page 2: ......
Page 287: ...23 OIL FILTER Section Page 23 1 REPLACEMENT OF THE OIL FILTER 23 3 ...