15.5
ASSEMBLY OF PISTON AND CONNECTING ROD ASSEMBLY
3. Position the long end of the connecting rod (2) on the same side as the valve relief (1)
in the top of the piston.
4. Install piston pin into the pin bore, through the rod, until it rests against the previously
installed retaining ring.
5. Using the appropriate
fl
at-nosed pliers, install the other retaining ring into the retaining
ring recess in the piston boss to lock the pin in place. Orient the retaining ring gap to
either the 12 o'clock or 6 o'clock position.
All information subject to change without notice.
15-10
DDC-SVC-MAN-0081 2010
Copyright © 2010 DETROIT DIESEL CORPORATION
Summary of Contents for EPA07
Page 1: ......
Page 2: ......
Page 287: ...23 OIL FILTER Section Page 23 1 REPLACEMENT OF THE OIL FILTER 23 3 ...