manualshive.com logo in svg

DETEWE OpenPhone 28, User Manual

Share
Download
DETEWE OpenPhone 28 User Manual Download Page 68

66

The Menus

Features and Menus

set. If the function “Silent 
Alarm” is activated, then the 
programmed emergency call 
number will be dialled immedi-
ately. Is the function deactivated 
then a 30 second warning tone 
is sounded. With 

OK

 you activate 

(

“

) or deactivate this function.

Important Note

In accordance with your safety prac-
tice requirements, we advice you to 
please pay attention to the follow-
ing:
Operating your telephone in the op-
erations type emergency call with 
warning tone (i.e. “Silent alarm” is 
switched off) means that calls con-
tinue to be signalled during the 
30 second warning time. The warn-
ing tone will be repeated for a fur-
ther 30 seconds after the completion 
of the call or conversation and be-
fore the emergency call number will 
be dialled. Because of this, a delay 
can occur before the emergency call 
is made. Therefore in sensitive safety 
areas switch on the “Silent alarm” 
menu item, so that an emergency 
call is made immediately.

■

Auto Answer

: If an headset is 

plugged in then a connection is 
automatically created, you can 
make hands free calls. If the 
caller hangs up then the connec-
tion will be disconnected.

Please note:

If you are not using 

the headset, then please deactivate 

this function as unnoticed listening-
in by a caller is possible.

If no headset is connected and 
for an incoming call the tele-
phone is removed from the 
charging station, then the call is 
answered without pressing the 
receiver key 

A

. With 

OK

 you 

can activate (

“

) or deactivate 

this function.

Please note:

This function should 

only be used when the “Silent 
charging” function described below 
is off. 

■

Silent Charging

: The handset 

does not signal any calls as long 
as it is in the charger. This ap-
plies to acoustic signalling via 
the ringer, to visual signalling 
and the vibration signalling. 
Callers hear a busy tone. As soon 
as you remove the handset from 
the charger, calls are signalled 
again. With 

OK

 you can activate 

(

“

) or deactivate this function.

■

Coverage Warn.

: The coverage 

warning sounds a warning tone 
when leaving the radio range. 
Use 

OK

 to activate (

“

) or deacti-

vate this function.

■

User Name

: Here you enter or 

edit the name that appears on 
the display when the handset is 
in the idle state. Use the 

OK

 

softkey to save the setting.

Summary of Contents for OpenPhone 28





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands