11
OpenPhone 28
Installation
Inserting the MEM card
Provided the MEM card has not been
inserted into the device or requires
replacing:
■
Using your finger, first remove
the small MEM card from the
larger frame.
MEM card in OpenPhone 28
■
Slide the short side of the MEM
card diagonally under the two
small crescents (a) in the MEM
card panel (1). The shiny gold-
coloured contact points on the
MEM card should be facing
down!
■
Press the MEM card downwards
until the small catch (b) locks
(2).
Inserting the MEM card
Removing the MEM card
It is only necessary to remove the
MEM card if you pass on the handset
or if you need the MEM card for a
new handset.
■
Remove the battery pack from
the handset (see page 12).
■
Press the little catch (b) upwards
and simultaneously lift the MEM
card up slightly.
■
Take the MEM card out.
Inserting the Battery
■
Slide the battery into the casing
(1).
■
Press down the battery at the
end with the latch until it audi-
ble snaps shut (2).
Inserting the battery
2
1
a
b
2
Summary of Contents for OpenPhone 28
Page 1: ...OpenPhone 28 on the OpenCom 100 Communications System User Guide ...
Page 6: ...4 ...
Page 83: ......
