manualshive.com logo in svg

DETEWE OpenPhone 28, User Manual

Share
Download
DETEWE OpenPhone 28 User Manual Download Page 62

60

The Menus

Features and Menus

The display indicates a list of the 
configured MSNs and MSN groups. 
Select an entry. Then select 

Immediately

, 

After delay

 or 

Busy

 

for the forwarding mode. Then key 
in the external destination number 
and activate the function. Active call 
forwarding is indicated by a “+”. 
This is followed by the call forward-
ing destination. A “?” preceding the 
entry, 

? MSN Group 1

 for example, 

means that call forwarding is active 
for some MSNs or that there are vari-
ous call forwards activated for this 
group.

Please note:

For the “Divert MSN” 

call forwarding, the (external) desti-
nation call number is always en-
tered without the trunk line seizure 
code digit. If “Divert MSN” is exe-
cuted in the exchange (= external 
call forwarding, configured by the 
system administrator), it can take a 
few seconds after configuration for 
call forwarding to be activated in 
the exchange. All external calls to 
the MSN are forwarded. You can ac-
tivate all three types of forwarding 
simultaneously, in which case the 
call forwarding 

Immediately

 has 

priority.

Divert door

: Here you can pro-

gramme a “Call forwarding immedi-
ately” for door calls. If several door 
bells are configured on the 
communications system, first select 
the door bell whose calls are to be 
diverted. How many door bells are 
available and with which names 

they are listed in the menu, depends 
on the type of entrance intercom. 
Consult your system administrator if 
you have questions concerning the 
configuration of the door bells. Then 
key in the call forwarding 

Dest.

 (for 

entering the call number see also 
the chapter entitled 

Making Exter-

nal/Internal Calls

 starting on 

page 32). Activate call forwarding 
with 

On

. Active call forwarding is in-

dicated by a “+”, this is followed by 
the call forwarding destination. 

Remote divert

: This function allows 

you to programme call forwarding 
for other OpenCom 100 users. In or-
der to do so, “Call forwarding for 
other user” authorisation is required, 
otherwise this menu item will not be 
displayed. Also, you can programme 
call forwarding only for those users 
whose terminal has not been 
blocked for this type of access (these 
users will have the authorisation 
“Prevent call forwarding by other 
user”). 

Enter the internal call number for 
which you want calls to be for-
warded. The rest of the procedure is 
identical with the one for configur-
ing call forwarding for your own 
telephone (see page 59).

Follow me

: This call forwarding for-

wards calls from another device 
(source) to your telephone. You must 
know the device PIN of the other ter-
minal. If “Follow me” is active, all 
calls to the call numbers of the other 

Summary of Contents for OpenPhone 28





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands