01/2018
40 / 80
6159933780
Issue no: 09
CVIL II
7.8.5 - ETHERNET SOCKET 3 menu
The ethernet socket 3 is used for the following functions:
● Open Protocol.
● Desoutter Protocol.
7.8.6 - PLC menu
To get the functionalities it is necessary to insert an
optional fieldbus module.
The layout of the setting screens shall differ according to
the inserted module.
7.8.6.1 - Ethernet/IP module
Parameter
Comment
IP Address
IP address of the controller in the
PLC network (must differ from
Ethernet address see "ETHERNET
CONFIGURATION menu", page 39).
Mask
In case of integrating the controller in
an existing network, please contact
your administrator to get the correct
mask.
Gateway
To be set when the PLC network uses
"Gateway".
7.8.6.2 - Profinet IO module
Parameter
Comment
IP Address
IP address of the controller in the
PLC network (must differ from
Ethernet address see "ETHERNET
CONFIGURATION menu", page 39).
Mask
In case of integrating the controller in
an existing network, please contact
your administrator to get the correct
mask.
Gateway
To be set when the PLC network uses
"Gateway".
Set by PLC
Tick "Set By PLC" to have the IP
address, mask and gateway set by the
PLC.
7.8.6.3 - Profibus module
Parameter
Comment
Slave #
Slave number of the controller in the
PLC network.