67
DISPOSAL OF EQUIPMENT
DISPOSAL AND DECOMMISSIONING OF DENTALEZ PRODUCTS
NOTE:
All local regulatory requirements for disposal and decommissioning of equipment apply.
ELECTRICAL SALVAGE:
Remove all circuit board and electrical cabling for recycle as electrical salvage.
METAL SALVAGE:
Remove all aluminum and steel components for recycle as metal salvage.
PLASTIC SALVAGE:
Remove all plastic components for recycle as plastic salvage.
BIOLOGICALLY CONTAMINATED SALVAGE:
Cuspidor, waste lines from the cuspidor, and the oral extraction lines
should be handled with precaution and disposed of appropriately.
NON-SALVAGE COMPONENTS:
All other material unsuitable for recycling should be disposed of properly.
For specific questions regarding material type, contact DENTALEZ customer service. For decommissioning information
on associated equipment from other manufacturers, refer to the documentation from the manufacturer.
If the area of concern is not addressed in this manual, contact DENTALEZ customer service at 866-DTE-INFO. (See
.)
Please have the following product information available. Information may be found on the product model/serial number
label on the compressor
(FIGURE 86)
:
FIGURE 86. MODEL/SERIAL NUMBER LABEL
ON THE COMPRESSOR
Model No: XXXXXX
Serial No: XXXXXX
Date of Mfg: XX-XX-XXXX
2500 Highway 31 South
Bay Minette, AL 36507
866-DTE-INFO
www.dentalez.com
DIPL: 004999_F
SERVICE INSTRUCTION
Model Name:
Model Number:
Serial Number:
Date of Installation:
Dealer:
SECTION VI - USER SERVICE INFO
