12
COMPRESSOR USER MANUAL
866-DTE-INFO
dentalez.com
PN: 7717-004A
ASSEMBLY
1.
To help in determining the routing of the drain hose, read the following tips on proper installation.
The connection at the bottom of the coalescing filter is designed to work with either the elbow fitting or the 3/8"
hose provided in the kit, depending on space constraints in the utility room.
The drain hose will require a steady downward slope to the drain.
Never route the drain hose assembly across traffic areas in the utility room. This could create tripping or falling
hazards that could result in injury to personnel.
2. The connections for installing the filter drain are a “push-to-connect” style of fitting and do not require any tools to
install. After determining proper routing, simply insert either the hose end or the elbow fitting into the fitting on the
bottom of the coalescing filter bowl. Apply light force until the item stops. Gently pull the opposite direction on the
hose or fitting to determine if they have properly seated into the connection. If the fitting or hose comes out with
light force, then the hose was not fully seated into the connection and can be re-inserted again.
3. If, for some reason, the fitting or hose needs to be released from the connection, depressing the colored plastic
ring (while gently pulling on the hose or fitting) releases the hose or fitting from the connection
(FIGURE 5)
.
NOTE:
If drain plumbing is not accessible, the supplied purge bowl can be used instead to catch disposal water. The
water should be manually emptied daily.
FILTER DRAIN KIT (CONTINUED)
SECTION III - INSTALLATION
FIGURE 5. ELBOW FITTING INSTALLED IN
COALESCING FILTER DRAIN
COLORED
RING:
PUSH IN
TO RELEASE
ELBOW
FROM DRAIN
FITTING
ELBOW
FITTING
