Denso BHT-1170BWB-CE, User Manual

Page: 97 / 219

85
Barcode Handy Terminal/2D code Handy Terminal
[11] Startup Configuration
"Startup Config” is used to define how the BHT starts up after rest and
full-reset.
Refer to Chapter 2, 2.6.6 Reinstall/Recovery methods of data after
Reset/Full reset, and Chapter 7, 7.1 System Errors.
To set up, double tap the "Startup Config” icon in the System Properties.
General
(1) Automatic Restore Restore Data - File &
Registry
(BHT Backup)
(2) Automatic Registry Restore Restore Data - Registry Only
(3) Automatic File Copy Copy files from one folder to another
(4) Automatic Application Setup and Reboot Setup Launcher
(5) Automatic Application Launch Startup Launcher - Flash "Startup" folder...:
(6) Automatic Application Launch Startup Launcher - Windows "Startup" folder...:
Restore Data:
Selects whether to perform “Automatic Restore”
File & Registry: Restores the files and registry from the BHT backup data
Registry Only: Restores only the registry saved in the registry (default)
The following functions are supported by File & Registry (BHT Backup).
Storage device:
Storage location of backup file
Backup file: Backup file name to be restored automatically
Copy files from one folder to another: Selects whether to perform “Automatic File Copy”
"Flash\Copyfile" folder...:
Open the "Flash\Copyfile" folder with file explorer
"Flash\Startup\Windows" folder...: Open the "Flash\Startup\Windows" folder with file explorer

Note

“Automatic File Copy” is not performed if no files exist in the above folder,
even if "Copy files..." is selected.
Setup Launcher: Selects whether to perform “Automatic Application Launch”.
"Setup" folder...: Open the "\Flash\Setup" folder with file explorer
Reboot after Setup: Selects whether to reset the system after the execution of program.
Startup Launcher: Automatically launches any application
Wait N Seconds :
Wait specified second(s) and execute a startup application. (default:0)
(Range : 0 to 10)
For example “wait a few seconds till network is connected
and execute a startup application”
Windows "Startup" folder...: Open the "\Windows\Startup" folder with file explorer
Flash "Startup" folder...: Open the "\FLASH\Startup" folder with file explorer

Note

“Automatic Application Setup and Reboot” is not performed if no files exist in
the above folder, even if "Setup Launcher" is selected.

Note

“Automatic Application Launch” is not performed if no files exist in the above
folder, even if each of the corresponding functions is selected.