Denso BHT-1170BWB-CE, User Manual

Page: 114 / 219

102
BHT-1170BWB-CE / BHT-1171BWB-CE
[16] Network Settings
"Network Settings" is used to enable or disable IPv6 (Internet Protocol
version 6).
IPv6 is set to “Enable” as default.
To change, follow the steps below.
1. Double-tap the Network Settings in the System Properties.
The “Network Settings” screen is displayed.
Enable: IPv6 is activated.
Disable: IPv6 is deactivated.
2. Select either “Enable” or “Disable”, then tap the “Apply” button.
The popup message shown on the right is displayed.
3. Tap the “OK” button on the right corner of the message.
The BHT performs the reboot for the change to take effect.
LAN / WLAN interface Metric
Automatic metric specifies whether TCP/IP automatically calculates a
value for an interface metric that is based on the speed of the interface.
The highest-speed interface has the lowest interface metric value.
Interface metric provides a location for you to type a value for the interface
metric for this network connection. A lower value for the interface metric
indicates a higher priority for use of this interface.