Denso BHT-1170BWB-CE User Manual Download Page 38

Page: 38 / 219

BHT-1170BWB-CE / BHT-1171BWB-CE

2.7.2

Extracting the microSD

Extract the microSD card (option) from the BHT using the following procedure.



Caution



Always turn the BHT power OFF before extracting the microSD card. Failure to observe this may result in
the loss of data stored in the microSD card.

Remove the battery.

Slide the microSD card cover in the OPEN direction
and then open the microSD card cover.

microSD card
cover

Extract the microSD card from the slot beside the
microSD card cover.

microSD card



Point



Ensure that the microSD card is extracted
in a direction that matches the shape of
the microSD card slot.
Don't extract the microSD card by the
strong power more than necessary.
The microSD card and the microSD card
cover may be damaged.

Close the microSD card cover and then slide the
microSD card cover in the LOCK direction.

Load the battery.

Summary of Contents for BHT-1170BWB-CE




























































































































































































































Search results

Summary of Contents for BHT-1170BWB-CE

Reviews:

Related manuals for BHT-1170BWB-CE

Brands by name

Popular brands

Denso BHT-1170BWB-CE, User Manual

Search results

Summary of Contents for BHT-1170BWB-CE

Reviews:

Related manuals for BHT-1170BWB-CE

Brands by name

Popular brands