Denso BHT-1170BWB-CE, User Manual

Page: 194 / 219

182
BHT-1170BWB-CE / BHT-1171BWB-CE
6.3 Using the BHT after Long Periods
Data including files and settings stored in the RAM may be lost and the calendar clock may stop if the BHT is left
unused for long periods of time.
(Because the RAM will revert to the factory default, it is recommended that any important data be backed up to the
“
FLASH
”
folder or uploaded to the host computer. When the BHT turns ON after the data in the RAM is deleted, the
BHT starts from the “Initial Setup”.)
Take appropriate measures in accordance with the procedure below.
Insert a fully charged battery.
* This is used for backup battery charge. Therefore
should not be removed from the BHT for at least 2
days.
Can the power be
turned ON?
No
Yes
Power ON
Does the normal
screen display?
No
The normal screen does
not display.
"Working" screen displays
for long time. The “No system!” screen
displays.
"Working" screen displays for log
time after full reset.
Yes
The BHT can be used.
Charge promptly before
the battery becomes
fully depleted. (*)
Perform a “full reset”.
Refer to “Chapter 2 BHT
Preparation” – “2.4 Initial
Setup” or "2.6 Resetting
and Full Resetting".
The following reasons may be
considered. Contact the system
administrator.

Hardware damage

Application failure

Point

*: Files may become corrupt if left for a long period of time without replacing
the battery.