Denso BHT-1170BWB-CE, User Manual

Page: 83 / 219

71
Barcode Handy Terminal/2D code Handy Terminal
[3] FTP Menu
“FTP” is a FTP Client software program (FTPClient), and is used when the BHT transfers files from or to
the FTP server.
When the “FTP” menu is tapped for the first time, the “FTP Client Configuration” is displayed.
After the FTP Client Configuration setup, the FTPClient is displayed.
Follow the steps to use the FTPClient.
 Step 1: FTP Client Configuration
Tap “3: FTP” in the Communication Menu to set up the “FTP Client
Configuration”.
FTP Settings;
Server:
IP address or host name of the FTP server
User ID: User name registered in the FTP server
Password: Password of the above user name
Directory: Folder to be used (Use the root folder if left blank)
Other Settings;
“Use temporary file on downloading” check box:
Check the box to save an existing file as a temporary file when downloading, just in case the
download fails.
Make sure that the device memory has enough space to save a temporary file before downloading.
“Close progress dialog automatically after transfer finish” check box:
Check the box to automatically close the popup dialog for the file transfer progress when the file
transfer is completed,
To confirm that the BHT can log into the FTP server, tap the “Test”
button.
When the BHT is successfully logged into the FTP server, the popup
message shown on the right is displayed.
Close the popup message, then tap the “OK” button to proceed to file
transfer.

Note

Connect the BHT to a wireless network with WLAN Manager, before starting the
file transfer via a wireless LAN communication.
Refer to Chapter4, 4.5 Wireless Network Settings.

Note
 Once the FTP Client Configuration is set up, the next time the FTP Client is
activated, the file transfer screen (FTPClient) is displayed.