Delta VFD-L-I Series, User Manual

Page: 70 / 100

Chapter 4 Parameters
|
VFD-L-I Series
Revision July 2009, SW V1.1 4-49
Group 9: Communication Parameters
09-00 Communication Address
Settings 1 to 247 Factory Setting: 1
If the AC drive is controlled by RS-485 serial communication, the communication address
must be set via this parameter.
RS-485
A 0
A1
A 2
VFD-L-I
V FD-L-I
VFD-L-I
Computer
09-01 Transmission Speed
Factory Setting: 1
Settings 0 Baud rate 4800 bps (bits / second)
1 Baud rate 9600 bps (bits / second)
2 Baud rate 19200 bps (bits / second)
Users can set parameters and control the operation of the AC drive via the RS-485 serial
interface of a personal computer. This parameter is used to set the transmission speed
between the computer and AC drive.
09-02 Transmission Fault Treatment
Factory Setting: 0
Settings 0 Warn and keep operating
1 Warn and RAMP to stop
2 Warn and COAST to stop
3 No warning and keep operating
09-03 Time-out Detection
Factory Setting: 0
Settings 0 Disable
1 Enable