Chapter 4 Parameters
|
VFD-L-I Series
4-10
Revision July 2009, SW V1.1
4.2 Description of Parameter Settings
Group 0: User Parameters
This parameter can be set during operation.
00-00
Identity Code of the AC Motor Drive
Settings
Read Only
Factory setting: 3
Pr. 00-00 displays the identity code of the AC motor drive. At the meanwhile, it can read
Pr.00-01 to check the rated current.
00-01
Rated Current Display of the AC motor drive
Unit: 0.1A
Settings
Read Only
Factory setting: 1.6A
Pr. 00-01 displays the rated current of the AC motor drive. By reading this parameter the user
can check if the AC motor drive is correct.
00-02
Parameter Reset
Factory Setting: 0
Settings
0~9
No
function
10
All parameters are reset to factory settings
This setting allows the user to return all parameters to the factory default settings.
00-03
Start-up Display Selection
Factory Setting: 0
Settings 0
Display the frequency command value (LED F)
1
Display the actual output frequency (LED H)
2
Multifunction display, see Pr.00-04
3
Display output current (LED A)
This parameter is used to set the start-up display.
00-04
Content of Multi-function Display
Factory Setting: 0
Settings 0
Display the user-defined unit (u)
1
Display the counter value (C)
2
Display the content of PLC time (1=tt)
3
Display the DC BUS voltage (U)
4
Display the output voltage (E)
Summary of Contents for VFD-L-I Series
Page 1: ...PLC1 ir...
Page 2: ......
Page 3: ......
