Delta PPM R4E Installation Manual Download Page 52

Page: 52 / 96

５

.Description of the screen display

5.1.Home Screen

This is the Home screen of the monitor. Illustrations and icons displayed on this screen are explained.

⑭

⑫

③

⑤

④

②

①

⑥

⑪

⑩

⑨

⑦

⑧

⑬

①

Date / Time

The current date and time are displayed.

Not connect to the LAN or internet.

It's able to connect to LAN, but not able to connect to external internet

Internet is working normally

Internet time synchronization is not successful

Internet time synchronization is successful

②

③

Suppression icon

A Suppression icon is displayed when there is suppression on the operation of the Inverter.

Icon

Operating mode

Voltage elevation suppression

Temperature elevation
suppression

The voltage of the commercial power system has reached
a high level while the Inverter was in operation. The
output of the Inverter is being suppressed.

The internal temperature of the Inverter has reached
a high level. The output of the Inverter is being suppressed.

Description

Description of the screen display

Summary of Contents for PPM R4E

































































































Search results

Summary of Contents for PPM R4E

Reviews:

Related manuals for PPM R4E

Brands by name

Popular brands

Delta PPM R4E, Installation Manual

Search results

Summary of Contents for PPM R4E

Reviews:

Related manuals for PPM R4E

Brands by name

Popular brands