Delta PPM R4E Installation Manual Download Page 51

Page: 51 / 96

■ When wiring from bottom

■ When wiring from top

●

Desktop installation method

①

Insert the Wall Surface / Desktop Mounting Plate in the insertion slot for anchoring the Desktop

Mounting Plate at the lower section of the main unit, being careful about the direction the plate

is facing.

②

Verify to ensure that there is no gap between the Wall Surface / Desktop Mounting Plate and

Part A at the bottom of the main unit, as shown in the figure to the right.

①

②

Ａ

4.2.Desktop Installation

4.3. Guiding the AC Adapter Cable

②

①

Remove the tab on the wiring access, using a pair of pliers or the like.

(Remove burr with a pair of pliers to ensure that the cables are not scratched.)

②

Guide through the cables.

There are two wiring accesses in the upper and lower sections

on the reverse side of the Power Monitor.

According to the prescribed wiring method, remove the tab
on the wiring access, and guide the cable through.

①

Installation Method

Summary of Contents for PPM R4E

































































































Search results

Summary of Contents for PPM R4E

Reviews:

Related manuals for PPM R4E

Brands by name

Popular brands

Delta PPM R4E, Installation Manual

Search results

Summary of Contents for PPM R4E

Reviews:

Related manuals for PPM R4E

Brands by name

Popular brands