Delta PPM R4E, Installation Manual

Page: 61 / 96

61
■ Connection setting (wireless models)
Make the connection setting if expanding or replacing inverters, or if replacing the power meter
or wireless communications unit.
※
During initial power monitor startup, the connection setting start screen is displayed automatically,
but from the second time onwards, it is necessary to switch to service mode to make the connection
settings. The connection setting page in not displayed in normal mode.
[Expanding the Inverters]
If expanding the solar generator system and adding inverters, make the following settings.
The amount of power generated by the additional inverters cannot be measured unless the following
settings are made.
(1) Touch the frame for the serial number of the inverter. The keyboard will be displayed.
Enter the inverter serial number. After entering, touch the button.
※
Use alphanumeric characters to enter the serial number. Not case sensitive.
(2) Touch the number for the expansion inverter and the enabled power meter checkboxes, enable
the checkboxes, and touch the [Save] button.
The settings complete dialog box will be displayed, and touch the [Yes] button.
[Confirm] button
接続設定画面
connection setting screen
入力する画面
Input screen
接続設定画面
connection setting screen
設定完了ダイアログ
Settings complete dialog box
Service Mode