Delta PPM R4E, Installation Manual

Page: 69 / 96

Folder Selection screen
④
Sleep mode
The duration of time with no operation until the liquid crystal display on the monitor is
turned off can be set.
Setting range: 1, 2, 3, 4, 5, 10, 15, 20, 25 and 30 minutes
The default setting is 5 minutes.
Touching the screen while in the sleep mode will trigger the display of the screen.
Furthermore, when an error code is displayed, the screen is turned on and the display
reverts to the Home screen.
⑤
Screen Brightness
The brightness of the screen can be selected in ten levels.
Setting range: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
The default setting is 8.
③
Slide interval
The screen switching time of the slideshow can be set (5, 10, 20 and 30 seconds).
The default setting is 10 seconds.
* It may take some time to display larger files.
(The recommended image size is 800 x 480 pixels.)
Touching the screen while a slideshow is being played will terminate the slideshow and
change the display to the Home screen.
If an error occurs, the slideshown terminates and Change the display to the Home screen.
⑥
Version
The firmware version of the Power Monitor is displayed.
⑧
Language
The language of the Power Monitor can be selected.
Setting range: English and Japanese.
⑦
This button is for demo mode. Do not click when actual use.
69
Service Mode