Delta PPM R4E, Installation Manual

Page: 34 / 96

Reconfirmation screen
Connection setting complete screen
（７） When the settings are complete, the "Home screen" will be displayed.
As processing is implemented immediately after the settings are made, a " " icon is displayed,
so check the following details 1 to 3 mins later.
・ Check that the " " icon is not displayed on the home screen.
・ Check that the values for the power production icon have changed.
・
Check the connection setting and connection log.
※
If making the connection setting again, switch to service mode.
For service mode, see "6. Service Mode" (page 58).
（６） The reconfirm screen will be displayed, so when the settings are finished, press the [Save] button.
The "Connection setting complete" dialog box will be displayed. Press the [Yes] button to
display the home screen. To change the settings, touch the [Reconfigure] button.
Installation
（
Wired
）
（５）
When the time settings are finished, the connection setting will be displayed, so make the
connection setting.
If using wires, select as the connection method, and then enable the No. field
of the power meter and the No. field of the ID number set on the inverter, and press the [Save] button.
connection setting screen (enabled)
(Example shows inverter ID 1 enabled)
34