Delta PPM R4E, Installation Manual

Page: 31 / 96

Installation
（
Wired
）
・
Process the cable before use.
・ Creating 6-pin connectors
Hold down the enclosed 6-pin connector ①
, and insert the cable.
・ Connecting the main unit and the 6-pin connectors
（１） Insert the 6-pin connector into the main unit.
（２） Pass a screwdriver through the screw hole, and tighten the two screws for the 6-pin connector.
（３） When all the wiring is complete, install the power monitor in its installation site.
When the connectors are complete, connect to the main unit.
①
Screw hole
Screw hole
■ Under-wiring ■ Over-wiring
2.7.Setting Power Monitor and Cable
8mm
Cable
40mm
Φ0.6~0.8
Φ5~6
31