Delta PPM R4E, Installation Manual

Page: 64 / 96

64
接続設定画面
connection setting screen
設定完了ダイアログ
Settings complete dialog box
(4) Touch the frame for the serial number of the power meter. The keyboard will be displayed.
Enter the power meter serial number. After entering, touch the button.
※
Use alphanumeric characters to enter the serial number. Not case sensitive.
(5) Touch the checkbox for the replacement power meter to enable the checkbox, and touch the
[Save] button. The settings complete dialog box will be displayed, so touch the [Yes] button.
(6) When the settings are complete, the "Home screen" will be displayed.
As processing is implemented immediately after the settings are made, a " " icon is displayed,
so check the following details 1 to 3 minutes later.
・
Check that the " " icon is not displayed on the home screen.
・
Check that the values for the generator power, power consumption, and feed-in/purchased
electricity power icons have changed.
(7) When the settings are complete, return to normal mode using " Exiting service mode" (page 58).
(8) After the replacement is finished, turn ON the solar generator breakers.
[Confirm] button
接続設定画面
connection setting screen
入力画面
Input screen
Service Mode