Delta Electronics HMC Series Manual Download Page 41

Page: 41 / 108

HMC Take-out Robot for Injection Molding Machine

June, 2015

2.6.1 Troubleshoot in Jog Mode

Users can use jog function to clear alarms.

Please note that the position protection for

each axis will be invalid when applying jog function.

(1)

Servo activated:

Servo on the drive in manual mode first before taking other

actions.

(2)

Mode:

Unlimited mode

only

(3)

Axis selection:

Select the axis which is going to execute commands.

(4)

Speed:

The speed (%) in jog mode. It can only operate at 10% of speed or below in

this situation.

(5)

Jog function enabled:

Jog function enabled. It should work with enabling switch.

(Disable

/ Enable

)

(6)

Jog in reverse direction:

Jog in reverse direction. Release the button to stop the

operation

(7)

Jog in forward direction:

Jog in forward direction. Release the button to stop the

operation

Summary of Contents for HMC Series













































































































Search results

Summary of Contents for HMC Series

Reviews:

Related manuals for HMC Series

Brands by name

Popular brands

Delta Electronics HMC Series, Manual

Search results

Summary of Contents for HMC Series

Reviews:

Related manuals for HMC Series

Brands by name

Popular brands