HMC Take-out Robot for Injection Molding Machine
June, 2015
43
2.6.3 Jog with Limited Range
Jog function can be used within the set distance and non-inhibited zone
.
Users can
specify the max. moving distance for one operation with jog function. It can be applied
for teaching the position.
(1)
Mode:
Limited mode
(2)
Axis selection:
Select the axis which is going to execute commands
(3)
Speed:
The speed (%) in jog mode, range from 1 to 100%.
(4)
Set the moving distance:
Set the max. moving distance in jog mode. Use
and
to change the setting. The moving distance can be set as 100
,
10
,
1 and
0.1 (mm).
(5)
Jog function enabled:
Jog function enabled. It should work with enabling switch.
(Disable
/ Enable
)
(6)
Jog in reverse direction:
Jog in reverse direction. Release the button to stop the
operation
(7)
Jog in forward direction:
Jog in forward direction. Release the button to stop the
operation
Summary of Contents for HMC Series
