HMC Take-out Robot for Injection Molding Machine
50
June, 2015
then set this value to 0.
(10)
Cycle time:
The time it takes for the last cycle
(11)
Signal from IMM:
It displays the input/output signal of the injection molding
machine and the current status of the system.
(12)
Running setting:
This window shows production setting and
the
related
information.
(13)
Total number of the product:
When the
number of completed product reaches
this setting value, a window will pop-up as the reminder and stop auto operation.
Set it to 0 means to disable this function.
(14)
Planned cycles:
When the
number of completed product reaches this setting value,
a window will pop-up. Set it to 0 means to disable this function.
(15)
Planned reminder cycles to warn:
When the number of defective goods exceeds
the setting value, an alarm will occur as a reminder.
Set it to 0 means to disable this
function.
(16)
Current cycle time:
It shows the duration time for the current cycle.
(17)
Current catch time:
The product take-out time of the current cycle
Summary of Contents for HMC Series
