manualshive.com logo in svg

Dell SonicWALL GX250, Manual

The Dell SonicWALL GX250 User Manual is a comprehensive guide that provides step-by-step instructions to optimize the usage of this powerful network security appliance. Download the free manual from manualshive.com and gain valuable insights into configuring and maintaining the GX250 to enhance your network's protection and performance.

Share
Download
background image

SonicWALL Internet Security Appliance Guide Page 45

6. Enter your network's subnet mask in the

 LAN Subnet Mask

 field. The 

LAN Sub-

net Mask

 tells your SonicWALL which IP addresses are on your LAN. Use the de-

fault value, "255.255.255.0", if there are less than 254 computers on your LAN. If 
you have multiple subnets on your network, add the addresses using the 

Add LAN

 

Subnet

 field. 

7. Enter the user name provided by your ISP in the 

User Name

 field. The user name 

identifies the PPPoE client.

8. Enter the password provided by your ISP in the 

Password

 field. The password au-

thenticates the PPPoE session. This field is case sensitive.

9. Check the 

Disconnect after __ Minutes of Inactivity 

checkbox to automatical-

ly disconnect the PPPoE connection after a specified period of inactivity. Define a 
maximum number of minutes of inactivity in the 

Minutes

 field. This value may 

range from 1 to 99 minutes.

10. If your ISP does not provide you with an IP address, select 

Obtain IP Address 

automatically

. If your ISP does provide you with a static ISP address, select 

Use

 

the following IP address

, and type in the IP address provided into the IP ad-

dress field. Be sure to type it in exactly as it is provided to you.

11. Click the 

Update

 button. Once the SonicWALL has been updated, a message con-

firming the update is displayed at the bottom of the browser window. Restart the 
SonicWALL for these changes to take effect.

Note

: When NAT is enabled, the SonicWALL LAN IP Address should be the gateway

address for computers on the LAN.

When your SonicWALL has successfully established a PPPoE connection, the 

Network

page displays the SonicWALL WAN IP settings. The 

WAN Gateway (Router)

Address

, 

SonicWALL WAN IP (NAT Public) Address

, 

WAN/DMZ Subnet Mask

,

and 

DNS Servers

 are displayed.

Note

: The SonicWALL does not relay DNS settings to the LAN; you must enable and

configure the SonicWALL's DHCP server or manually configure your computers' DNS

settings to obtain DNS name resolution.

Restart the SonicWALL

Once the network settings have been updated, the 

Status

 bar at the bottom of the

browser window displays "Restart SonicWALL for changes to take effect." Restart the
SonicWALL by clicking 

Restart

. Then click 

Yes

 to confirm the restart and send the

restart command to the SonicWALL. The restart may take up to 90 seconds, during
which time the SonicWALL is inaccessible and all network traffic through the
SonicWALL is halted.

Note

: If you change the SonicWALL's LAN IP Address, you also need to change the

Management Station's IP address to be in the same subnet as the new LAN IP address.

integrated_manual.book  Page 45  Wednesday, June 13, 2001  6:21 PM

Summary of Contents for SonicWALL GX250









































































































































































































Reviews:

No comments

Related manuals for SonicWALL GX250

IBASE Technology FWA8600 User Manual preview
FWA8600
Brand: IBASE Technology Pages: 112
Dojo Pebble User Manual preview
Pebble
Brand: Dojo Pages: 34
Fortinet FortiDB-400B Quick Start Manual preview
FortiDB-400B
Brand: Fortinet Pages: 2
Fortinet FortiGate 5050-R Chassis Manual preview
FortiGate 5050-R
Brand: Fortinet Pages: 28
Fortinet FortiGate 3600A Installation Manual preview
FortiGate 3600A
Brand: Fortinet Pages: 64
Fortinet FortiGate 1000A Administration Manual preview
FortiGate 1000A
Brand: Fortinet Pages: 412
Symantec 10268947 - Network Security 7160 User Manual preview
10268947 - Network Security 7160
Brand: Symantec Pages: 134
Symantec 10744983 - Mail Security 8320 Administration Manual preview
10744983 - Mail Security 8320
Brand: Symantec Pages: 249

Brands by name

Popular brands

Load more brands