manualshive.com logo in svg

Dell SonicWALL GX250, Manual

The Dell SonicWALL GX250 User Manual is a comprehensive guide that provides step-by-step instructions to optimize the usage of this powerful network security appliance. Download the free manual from manualshive.com and gain valuable insights into configuring and maintaining the GX250 to enhance your network's protection and performance.

Share
Download
background image

Page 110 DHCP SERVER

4. Enter the domain name registered for your network in the 

Domain Name 

field. 

An example of a domain name is "your-domain.com". If you do not have a domain 
name, leave this field blank.

5. Select 

Set DNS Servers using the SonicWALL Network settings

 to use the 

DNS servers that you specified in the SonicWALL 

Network

 section.

If you wish to use different DNS servers than the ones specified in the SonicWALL

Network

 section, then select 

Specify

 manually. Enter your 

DNS Server

addresses in the 

DNS Server 1

, 

DNS Server 2

, and

 DNS Server 3

 fields. The

DNS servers are used by computers on your LAN to resolve domain names to IP
addresses.  You only need to enter one DNS Server address, but multiple DNS
entries improve performance and reliability. 

6. Enter your 

WINS Server

 address(es) in the 

WINS Server 1

 and 

WINS Server 

2

 fields. 

WINS Servers

 resolve Windows-based computer names to IP addresses. 

If you do not have a WINS server, leave these fields blank.

7.

Dynamic Ranges

 are the ranges of IP addresses dynamically assigned by the 

DHCP server. The 

Dynamic Ranges

 should be in the same subnet as the Son-

icWALL LAN IP Address. 

Enter the beginning IP address of your 

LAN IP address

 range in the 

Range Start

field. Enter the ending IP address in the 

Range End

 field. Select the

 Allow BootP

clients to use range 

checkbox if you want BootP clients to receive IP leases.

Then click Update. When the SonicWALL has been updated, a message confirming
the update is displayed at the bottom of the browser window.

Continue this process until you have added all the desired dynamic ranges.

Note

: The 

DHCP Server

 will not assign an IP address from the dynamic range if the

address is already being used by a computer on your LAN. 

8. The 

DHCP Server

 can also assign 

Static Entries

, or static IP addresses, to com-

puters on the LAN. Static IP addresses should be assigned to servers that require 
permanent IP settings. 

Enter the IP address assigned to your computer or server in the 

Static IP

Address 

field. Enter the Ethernet (MAC) address of your computer or server in the

Ethernet Address

 field. Then click 

Update

. When the SonicWALL has been

updated, a message confirming the update is displayed at the bottom of your Web
browser window.

Continue this process until you have added all the desired static entries.

Note

: The SonicWALL DHCP server may assign a total of 254 dynamic and static IP

addresses.

integrated_manual.book  Page 110  Wednesday, June 13, 2001  6:21 PM

Summary of Contents for SonicWALL GX250









































































































































































































Reviews:

No comments

Related manuals for SonicWALL GX250

Watchguard Firebox T35 Series Hardware Manual preview
Firebox T35 Series
Brand: Watchguard Pages: 16
ZyXEL Communications ZyWALL 110 Series User Manual preview
ZyWALL 110 Series
Brand: ZyXEL Communications Pages: 562
D-Link DFL-210 - NetDefend - Security Appliance Log Reference Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 476
BaseWall Dual WAN VPN Firewall VPN 2000 User Manual preview
Dual WAN VPN Firewall VPN 2000
Brand: BaseWall Pages: 76
3Com 3C16792 - OfficeConnect Dual Speed Switch 16 User Manual preview
3C16792 - OfficeConnect Dual Speed Switch 16
Brand: 3Com Pages: 40
D-Link DIR-330 - Wireless G VPN Router Brochure & Specs preview
DIR-330 - Wireless G VPN Router
Brand: D-Link Pages: 3
H3C SecPath F100-C-EI Quick Start Manual preview
SecPath F100-C-EI
Brand: H3C Pages: 36
Resolution RE224GT User Manual preview
RE224GT
Brand: Resolution Pages: 2
Bitdefender BOXv2 User Manual preview
BOXv2
Brand: Bitdefender Pages: 13

Brands by name

Popular brands

Load more brands